MB7-839 IT Certification,braindumps,original questions

MB7-839 MB7-839 MB7-839 www.cert24.com

Exam Number/Code: MB7-839

Exam Name:NAV 2009 Core Setup and Finance

Version: demo

QUESTION 1

You work in an international company which is called Wiikigo. And you’re employed as the Developer for Microsoft Dynamics NAV. There is a colleague named Jason in your company. He is printing the Dimensions – Detail report. He is not clear about what the Include Dimensions field can be used for and asks for your advice. So what do you reply to him?

A. The Include Dimensions field is used to preview dimension conflicts prior to running the report.

B. The Include Dimensions field is used to assign levels to the dimensions chosen to print on the

report.

C. The Include Dimensions field is used to choose dimensions to include from the list of dimensions

linked to the Analysis View.

D. The Include Dimensions field is used to choose the dimensions to include from the list of all

dimensions set up in Microsoft Dynamics NAV.

Answer: BC

MB7-839 MB7-839 MB7-839 www.cert24.com

QUESTION 2

You work in an international company which is called Wiikigo. And you’re employed as the Developer for Microsoft Dynamics NAV. Accounting Periods are set up to define the periods used by a company for posting entries. In the options below, which is available for setting up Accounting Periods? (choose more than one)

A. Accounting Periods can be set up manually

B. Accounting Periods can be set up automatically

C. Accounting Periods can be set up automatically when a year is closed.

D. Accounting Periods can be set up for 365 periods, each one day in length.

Answer: ABD

MB7-839 MB7-839 MB7-839 www.cert24.com

QUESTION 3

You work in an international company which is called Wikigo. And you’re employed as the Developer for Microsoft Dynamics NAV. You have set up two dimensions: one for Department with values of Sales and Administration, and then one for Region with values of East, West, and Central. For customer 10000, you assigned the Region dimension with a value of West and the Department dimension with a value of Sales; the Value Posting rule is blank for both dimensions. For G/L account 6100, the Department dimension is assigned a value of Administration and the Value Posting rule is set to Same Code. In the Default Dimension Priorities, the priority is set to 1, for the Source Code of GENJNL and Table ID 18 (Customer). A user selects customer 10000 and then selects G/L account 6100 as the balancing account on a single journal line. When the user posts the entry, what happens?

A. The entry will not post

B. Region is West, Department is Sales

C. Region is blank, Department is Sales

D. Region is blank, Department is Administration

Answer: A

MB7-839 MB7-839 MB7-839 www.cert24.com

IT Certification,braindumps,original questions MB7-840

MB7-840 MB7-840 MB7-840 www.cert24.com

Exam Number/Code: MB7-840

Exam Name: NAV 2009 C/SIDE Introduction

Version: demo

QUESTION 1

You need to create a multi-record page that enables users to simultaneously view multiple records from a table and edit them if necessary. What type of page will you use?

A. List

B. RoleCenter

C. Worksheet

D. Document

Answer: AC

MB7-840 MB7-840 MB7-840 www.cert24.com

QUESTION 2

You have designed a blank form and attached a source table to it. You need to add a subform that shows multiple records from another table. Which properties do you need to set for the subform?

A. SubFormLink

B. ParentControl

C. SubFomSource

D. SubFormID

Answer: AD

MB7-840 MB7-840 MB7-840 www.cert24.com

QUESTION 3

Which of the following pairs of values in a relational expression are comparable?

A. SubFormLink

B. ParentControl

C. SubFomSource

D. SubFormID

E. Integer and Decimal

F. Date and DateTime

G. Text and Option

H. Option and Integer

Answer: ADEH

MB7-840 MB7-840 MB7-840 www.cert24.com

MB7-841 IT Certification,braindumps,original questions

MB7-841 MB7-841 MB7-841 www.cert24.com

Exam Number/Code: MB7-841

Exam Name: NAV 2009 C/SIDE Solution Development

Version: demo

QUESTION 1

You work in an international company which is called Wiikigo. And you’re employed as the Developer for Microsoft Dynamics NAV. There is a colleague who is named John in the company. He wants to know why it is a good idea to have a separate codeunit created for code that uses automation. (choose more than one)

A. It is because an object using automation can only be compiled on a machine on which the automation server is installed.

B. It is because of better performance.

C. It is because processing of records on the client machine will be enhanced.

D. It is because the automation type cannot be exported across the network.

Answer: AB

MB7-841 MB7-841 MB7-841 www.cert24.com

QUESTION 2

You work in an international company which is called Wiikigo. And you’re employed as the Developer for Microsoft Dynamics NAV. A code has been written by you. For the Customer table which is called Customer, a record variable is created by you. Now you are asked to identify which Customers reside in one of the regions that supported by your company, hence you intend to loop through the table. Now you are using a record variable which is to be filtered, before the record variable is filtered, what function do you called?

A. Customer.FINDSET()

B. Customer.SETRANGE()

C. Customer.SETCURRENTKEY()

D. Customer.SETPERMISSIONFILTER

Answer: C

MB7-841 MB7-841 MB7-841 www.cert24.com

QUESTION 3

You work in an international company which is called Wiikigo. And you’re employed as the Developer for Microsoft Dynamics NAV. There is a colleague who is named John in the company. He does not know the reason of using a Virtual table in Microsoft Dynamics NAV 2009. Since you are the IT professional, he asks for your answer. So what should you reply to him?

A. As a Dataitem in a report.

B. To store global information from C/AL variables.

C. To maintain current user statistics.

D. To know when to use the COMMIT statement.

Answer: A

MB7-841 MB7-841 MB7-841 www.cert24.com

IT Certification,braindumps,original questions MB7-842

MB7-842 MB7-842 MB7-842 www.cert24.com

Exam Number/Code: MB7-842

Exam Name: NAV 2009 Trade & Inventory

Version: demo

QUESTION 1

You are the consultant on a Microsoft Dynamics?NAV 2009 implementation. As part of a review of business requirements, you are discussing purchase discounts with your client. You determine that your client offers line discounts. In addition, your client posts the discount amounts to separate general ledger accounts. What setup is required to use line discounts and post them separately from purchases? Choose the 2 that apply.

A. In the Payment Disc. fields on the Vendor Posting Groups page, select an account from the Chart of Accounts.

B. In the Purchase Line Disc. Account field of the General Posting Setup page, select an account from the Chart of Accounts.

C. On the General FastTab of the Purchases & Payables Setup page, select Line Discounts in the Discount Posting field.

D. On the General FastTab of the Purchases & Payables Setup page, select the Post Line Discounts check box.

Answer: BC

MB7-842 MB7-842 MB7-842 www.cert24.com

QUESTION 2

When setting up Item Tracking Codes, users can determine many settings that control data entry requirements. What data entry requirements can be controlled through setups on the Item Tracking Code Card? Choose the 3 that apply.

A. Whether serial numbers or lot numbers are required for inbound transactions.

B. Whether serial numbers or lot numbers are required for outbound transactions.

C. Whether manual entry of warranty and expiration dates is required.

D. Whether auto selection of serial and lot numbers according to FEFO is activated.

Answer: ABC

MB7-842 MB7-842 MB7-842 www.cert24.com

QUESTION 3

You are the consultant on a Microsoft Dynamics?NAV 2009 implementation. You have determined through discussions that your client offers a customer an invoice discount of 2% when the total invoice amount exceeds 20,000 LCY. What setup do you advise your client to complete in Microsoft Dynamics NAV to accommodate the discount? Choose the 2 that apply.

A. On the Invoicing FastTab of the Customer Card, leave the default selection for the Invoice Discount Code.

B. On the Cust. Invoice Discounts page for the Customer Card, enter a line with Currency Code equal to blank, Minimum Amount of 20,000, and Discount% of 2.

C. On the Invoicing FastTab of the Customer Card, assign the relevant Customer Discount Group.

D. On the Invoicing FastTab of the Customer Card, select the Manually Calculate Invoice Discounts check box.

Answer: AB

MB7-842 MB7-842 MB7-842 www.cert24.com

MB7-848 IT Certification,braindumps,original questions

MB7-848 MB7-848 MB7-848 www.cert24.com

Exam Number/Code: MB7-848

Exam Name:NAV 2009 Service Management

Version: demo

QUESTION: 1

Which actions does the program perform when you convert a service quote to a service order?

Choose the 2 that apply.

A. Create a service order with status In Process

B. Recalculate response date and time on service item lines

C. Create allocation entries with status Reallocation Needed

D. Delete the converted service quote

Answer: B, D

MB7-848 MB7-848 MB7-848

QUESTION: 2

Which entities do you need to set up if you want to create a number of similar service

contracts?

A. Service contract groups

B. Service contract account groups

C. Service contract templates

D. Service blanket contracts

Answer: C

QUESTION: 3

What does the program do if you select the Link Service to Service Item check box in Service Management Setup? Choose the 2 that apply.

A. Select the Link Service to Service Item check box on new service orders

B. Select the Link Service to Service Item check box on all existing service orders

C. Require linking service lines to service item lines before you post service orders

D. Create links between service lines and service item lines when you post service orders

Answer: A, C

MB7-848 MB7-848 MB7-848

QUESTION: 4

What bases of calculating the default contract value of service items does the program offer when you set up the Service Management functionality? Choose the 2 that apply.

A. Fixed price

B. Weighted average

C. Unit cost

D. Unit price

Answer: C, D

MB7-848 MB7-848 MB7-848

IT Certification,braindumps,original questions N10-005

N10-005 N10-005 N10-005 www.cert24.com

Exam Number/Code : N10-005

Exam Name : Network+ Certification

Version : Demo

QUESTION 1
If one of the links to a computer on a physical star topology is served, what will be the result?

A. The entire network will stop working.
B. The affected link and the adjacent network links will stop working.
C. Only the affected link will stop working.
D. Only the adjacent links will stop working.

Answer: C

N10-005 N10-005 N10-005 www.cert24.com

Explanation/Reference:

In the star topology each computer is connected to a central point by a
separate cable or wireless connection. Thus each computer has a
dedicated link to the network central device and a break in the link
between a particular computer and the central network device will affect
only that computer.
References:
David Groth and Toby Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, pp. 10-16.

QUESTION 2
When one connection to a host fails in a full mesh network, which of the following is true?

A. All hosts can communicate
B. No hosts can communicate
C. Half of the host will lose communication
D. Only the two hosts between the failed connection will lose communication

Answer: A

N10-005 N10-005 N10-005 www.cert24.com

Explanation/Reference:

In a full mesh network, each node has a connection to at two other
nodes. Thus, should one connection fail, it will have no effect on
communication as all nodes will be connected to at least one other node.
References:
David Groth and Toby Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, pp. 14-15.

QUESTION 3
Which of the following network topologies uses the most cable?

A. Star
B. Ring
C. Bus
D. Mesh

Answer: D

Explanation/Reference:

In the mesh topology, each node is connected to at least three other
nodes. This requires more cabling than in the ring or bus topology, in
which each node is connected to only two other nodes, or the star
topology, in which each node is connected to a central hub or switch.
Incorrect Answers:

A: In the star topology, each node is connected to a central hub or
switch. This requires less cabling than in the mesh topology, in which
each node is connected to at least three other nodes.
B: In the ring
topology consists of a closed loop in which each node is connected to
the node ahead of it and the node behind it in the loop. This requires
less cabling than in the mesh topology, in which each node is connected
to at least three other nodes.
C: The bus topology is similar to the
ring topology, except that the cable does not form a complete loop, but
is terminated at each end. Each node, except the nodes at the end
points, is connected to the node ahead of it and the node behind it
along the cable. This requires less cabling than in the mesh topology,
in which each node is connected to at least three other nodes.
References:
David Groth and Toby Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, pp. 51-54.

QUESTION 4
Which of the following network topologies uses the least cable?

A. Star
B. Ring
C. Bus
D. Mesh

Answer: C

Explanation/Reference:

The bus topology consists of a single cable that connects the network
nodes. Both ends of the cable are terminated just after the last node.
Each node, except the nodes at the end points, is connected to the node
ahead of it and the node behind it along the cable. This requires least
amount of cabling.
Incorrect Answers:
A: In the star topology,
each node is connected to a central hub or switch. This requires more
cabling than in the bus topology, in which the nodes are connected on a
single trunk cable that is terminated just after the last nodes at
either end.
B: In the ring topology consists of a closed loop in
which each node is connected to the node ahead of it and the node behind
it in the loop. This requires more cabling than in the bus topology, in
which the nodes are connected on a single trunk cable that is
terminated just after the last nodes at either end and does not need to
connect the ends together to form a loop.
C: In the mesh topology, each node is connected to at least three other nodes. This

requires
more cabling than in the ring or bus topology, in which each node is
connected to only two other nodes, or the star topology, in which each
node is connected to a central hub or switch.
References:
David Groth and Toby Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, pp. 51-54.

QUESTION 5
Which of the following networking topology requires the MOST physical connections per node?

A. Bus
B. Ring
C. Star
D. Mesh

Answer: D

N10-005 N10-005 N10-005 www.cert24.com

N10-004 IT Certification,braindumps,original questions

N10-004 N10-004 N10-004 www.cert24.com

Exam Number/Code : N10-004

Exam Name : CompTIA Network+(2009 Edition)

Version : Demo

QUESTION 1

Which of the following can be configured to restrict specific ports and IP addresses from accessing the internal network? (Select TWO).

A. Layer 2 switch

B. MAC address filtering

C. ACLs

D. IIS server

E. Port scanner

F. Firewall

Answer: CF

N10-004 N10-004 N10-004 www.cert24.com

QUESTION 2

Which of the following authentication solutions also provides AAA and uses TCP?

A. TACACS+

B. Kerberos

C. RADIUS

D. RAS

Answer: A

N10-004 N10-004 N10-004 www.cert24.com

QUESTION 3

When the use of a smart card, pin number, and pass phrase is required to login to a system, which of the following types of authentication is being used?

A. Single sign on

B. PKI

C. Two factor authentication

D. Multi-factor authentication

Answer: D

N10-004 N10-004 N10-004 www.cert24.com

QUESTION 4

Which of the following would be used to test out the security of a specific network by allowing it to receive security attacks?

A. Honeynet

B. Honeypot

C. Vulnerability scanner

D. Network based IDS

Answer: A

N10-004 N10-004 N10-004 www.cert24.com

QUESTION 5

The protocols that use a three way handshake to transfer information can be found within which layer of the OSI model?

A. Layer 2

B. Layer 3

C. Layer 4

D. Layer 5

Answer: C

N10-004 N10-004 N10-004 www.cert24.com

IT Certification,braindumps,original questions NS0-101

NS0-101 NS0-101 NS0-101 www.cert24.com

Exam Number/Code : NS0-101

Exam Name : NetApp Accredited Sales Professional Exam

Version : Demo

QUESTION NO: 1
What is the definition of an RPO?

A. The acceptable amount of data lost during recovery
B. The acceptable length of time it takes to recover
C. The ability to recover from a backup
D. The acceptable length of time it takes to complete a backup

Answer: A

NS0-101 NS0-101 NS0-101 www.cert24.com

QUESTION NO: 2

A common customer response to a NetApp SQL Server solution is “I need a
Microsoft-certified solution.” What is the most appropriate response to
this statement?

A. NetApp has a strong presence on the Windows Hardware Compatibility site and is a Microsoft Gold Partner.
B. NetApp has several thousand customers running databases on NetApp storage systems.
C. NetApp supports multiple databases and Microsoft SQL server is one of those.
D. NetApp has experience in large-scale enterprise deployments, operating in more than 5,000 data centers worldwide.

Answer: A

NS0-101 NS0-101 NS0-101 www.cert24.com

QUESTION NO: 3

Which three benefits is a customer likely to derive when using the
NetApp SnapManager for Exchange solution in their messaging environment?
(Choose three.)

A. Virus-free email andattachments
B. Recovery in minutes
C. Classified and categorized email
D. Simplified management with automated backups
E. Quicker and easier storage provisioning

Answer: B,D,E

NS0-101 NS0-101 NS0-101 www.cert24.com

QUESTION NO: 4
NetApp SnapManager software enables efficient backups to be completed in _____.

A. Seconds
B. Minutes
C. Hours
D. Days

Answer: A

NS0-101 NS0-101 NS0-101 www.cert24.com

QUESTION NO: 5

Most Oracle customers require large development environments and they
are concerned about the amount of storage required to support them.
Which statement defines the NetApp value proposition for this situation?

A.
NetApp FlexClone provides the ability to almost instantly create
development environments without using additional storage capacity.
B. The NetApp Unified Storage approach allows customers to use both primary and secondary storage for development.
C. The NetApp scalable storage architecture allows customers to dynamically grow database environments at their own pace.
D. NetApp SnapVault uses less storage capacity when creating a development environment.

Answer: A

NS0-101 NS0-101 NS0-101 www.cert24.com

NS0-154 IT Certification,braindumps,original questions

NS0-154 NS0-154 NS0-154 www.cert24.com

Exam Number/Code : NS0-154

Exam Name : Data ONTAP 8.0 7-Mode Administrator

Version : Demo

QUESTION NO: 1

Which three items are NFS resources for export? (Choose three.)

A. aggregate

B. directory/qtree

C. file

D. subnet

E. volume

Answer: B,C,E

NS0-154 NS0-154 NS0-154 www.cert24.com

QUESTION NO: 2

Data ONTAP 8.0 7-Mode supports SMB 2.0 in Windows Vista and Windows Server 2008.

A. True

B. False

Answer: B

NS0-154 NS0-154 NS0-154 www.cert24.com

QUESTION NO: 3

In a tape environment after a SnapRestore reversion of a volume, incremental backup and restore

operations on the file or volume cannot rely on the timestamps to determine what data needs to be

backed up or restored. Which course of action ensures correct incremental backups?

A. Perform a base-level backup of the volume after you restore it.

B. Reboot the storage system to reset timestamps back to their original times before the reversion.

C. Take a new snapshot of the volume to create new base-level timestamps for the incremental

backup.

D. Take a new snapshot of the volume to create new base-level timestamps for the incremental

backup, and then perform a base-level backup of the volume after you restore it.

Answer: A

NS0-154 NS0-154 NS0-154 www.cert24.com

QUESTION NO: 4

Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous

SnapMirror? (Choose three.)

A. FilerA:source_vol FilerB:destination_vol – sync

B. FilerA:source_vol FilerB:destination_vol – 0-55/5 * * *

C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync

D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync

Answer: A,C,D

NS0-154 NS0-154 NS0-154 www.cert24.com

QUESTION NO: 5

Which changes the NDMP password on the Open System SnapVault agent?

A. password

B. password

C. svpasswd

D. svpassword

Answer: D

NS0-154 NS0-154 NS0-154 www.cert24.com

IT Certification,braindumps,original questions NS0-510

NS0-510 NS0-510 NS0-510 www.cert24.com

Exam Number/Code : NS0-510

Exam Name: NCIE – Backup and Recovery Implementation Engineer Exam

Version : Demo

QUESTION NO: 1

Which two technologies serve as the basis for SnapVault-based backups? (Choose two.)

A. QSM

B. VSM

C. SyncMirror

D. Snapshot

Answer: A,D

NS0-510 NS0-510 NS0-510 www.cert24.com

QUESTION NO: 2

Which NetApp backup and recovery solution is best for backing up remote office heterogeneous data storage?

A. Snapshot copies

B. SnapManager

C. SnapVault

D. Open System SnapVault

Answer: D

NS0-510 NS0-510 NS0-510 www.cert24.com

QUESTION NO: 3

From which three platforms does Open Systems SnapVault support backup and restore? (Choose three.)

A. IBM AIX

B. SunOS

C. HP HP-UX

D. Linux

E. Windows NT, Windows 2000, and Windows Server 2003

F. SGI IRIX

Answer: A,C,D

NS0-510 NS0-510 NS0-510 www.cert24.com

QUESTION NO: 4

What are three components of an Open Systems SnapVault (OSSV) installation? (Choose three.)

A. Primary System

B. Secondary System

C. OSSV agent installed on the primary system

D. OSSV agent installed on the secondary system

E. NetApp primary system

Answer: A,B,C

NS0-510 NS0-510 NS0-510 www.cert24.com

QUESTION NO: 5

The NearStore VTL provides a masking function to control Host access to virtual devices.

A. True

B. False

Answer: A

NS0-510 NS0-510 NS0-510 www.cert24.com