Exam dumps, software Testing engine Testcenter HP2-T16 HP cert24
Exam dumps, software Testing engine Testcenter HP2-T16 HP cert24

IT Exam,IT Certification,braindump,original questions, question pool,document, braindump, test questions, test question, dumps, test answers, cert24.com, preparation, pdf, certification questions, answers Certification, certification test, practice test, exam dumps, certification training, answers real questions

HP2-T16 Industry Standard Architecture and Technology our products come with a 100% guarantee of success. We hold this claim because of the highly dedicated and expert team that we have and because of our past performance.

QUESTION 1
What must you check prior to adding another processor to an existing system. (Select three)

A. amount of memory in the system
B. compatibility of the new process with existing processors
C. firmware requirements for the new processor
D. number of users currently logged into the system
E. number of processors the operating system supports
F. weight of the new processor

Answer: BCE

QUESTION 2
Which events could require a firmware update? (Select two)

A. downgrading memory
B. re-installing the operating system
C. adding support for larger, faster drives
D. adding virtual machines to a server
E. removing an existing processor
F. adding plug and play support

Answer: CF

QUESTION 3
Which statements are true about active and passive cooling systems? (Select two)

A. A passive cooling system uses only heat sinks.
B. An active cooling system uses only heat sinks.
C. An active cooling system adds devices such as fans.
D. A passive cooling system adds devices such as fans.

Answer: AC

Exam dumps, software Testing engine Testcenter HP2-T16 HP cert24

Exam dumps, software Testing engine Testcenter HP2-T20 HP cert24
Exam dumps, software Testing engine Testcenter HP2-T20 HP cert24

IT Exam,IT Certification,braindump,original questions, question pool,document, braindump, test questions, test question, dumps, test answers, cert24.com, preparation, pdf, certification questions, answers Certification, certification test, practice test, exam dumps, certification training, answers real questions

HP2-T20 Selling HP ProLian Servers HP Sales our products come with a 100% guarantee of success. We hold this claim because of the highly dedicated and expert team that we have and because of our past performance.

QUESTION NO: 1
In addition to extensive qualification processes, which HP innovations provide enhanced reliability for HP’s storage devices? (Select two.)

A. advanced carrier engineering
B. compatibility with c7000 enclosures
C. advanced SAS and SATA interfaces
D. advanced error handling in firmware
E. thin film head technology

Answer: C,D

QUESTION NO: 2
Which HP facility allows customers to visualize data center thermals and associate servers to power circuits?

A. Data Center Power Control
B. Intelligent Power Discovery
C. Insight Control Power Management Application Program Interface
D. Intelligent Power Distribution

Answer: B

QUESTION 3
How does Insight Control Virtual Machine Management reduce downtime?

A. It provides a failover cluster environment that automatically fails over database servers.
B. It automatically responds to predictive hardware failures on hypervisor host servers by
relocating VMs before a server fails.
C. It warns of predictive hardware failures on hypervisor host servers, enabling system operators to relocate VMs before a server fails.
D. It automatically responds to hardware failures on hypervisor host servers by relocating VMs.

Answer: B

Exam dumps, software Testing engine Testcenter HP2-T20 HP cert24

Exam dumps, software Testing engine Testcenter HP2-T25 HP cert24
Exam dumps, software Testing engine Testcenter HP2-T25 HP cert24

IT Exam,IT Certification,braindump,original questions, question pool,document, braindump, test questions, test question, dumps, test answers, cert24.com, preparation, pdf, certification questions, answers Certification, certification test, practice test, exam dumps, certification training, answers real questions

HP2-T25 Servicing HP Rack-Tower Server Solutions our products come with a 100% guarantee of success. We hold this claim because of the highly dedicated and expert team that we have and because of our past performance.

QUESTION NO: 1
A support engineer needs to replace drives on a ProLiant Gen8 server and must securely erase customer data. How can this be achieved?

A. Run the HP System Erase Utility to reset all settings.
B. Run the HP System Erase Utility to reset RBSU.
C. Run a third-party disk shredding tool.
D. Run the HP System Erase Utility to reset all disks.

Answer: D

QUESTION NO: 2
You replaced a Smart Array P812 in a DL380 G7 storage server. What should you do next?

A. Verify that the firmware level is current.
B. Install the BBWC battery.
C. Check the FBWC charge.
D. Replace the cache module.

Answer: A

QUESTION NO: 3
A customer has placed a service call because RAID 6 cannot be configured on a Smart Array P420i controller using 4 disk drives. What is the most likely cause of the problem?

A. The customer needs a minimum of 6 disk drives to support RAID 6.
B. The battery backed cache option is not installed.
C. The P420i is Smart Array Controller is defective.
D. The P420i Smart Array Controller does not support RAID 6.

Answer: B

Exam dumps, software Testing engine Testcenter HP2-T25 HP cert24

Exam dumps, software Testing engine Testcenter HP2-T26 HP cert24
Exam dumps, software Testing engine Testcenter HP2-T26 HP cert24

IT Exam,IT Certification,braindump,original questions, question pool,document, braindump, test questions, test question, dumps, test answers, cert24.com, preparation, pdf, certification questions, answers Certification, certification test, practice test, exam dumps, certification training, answers real questions

HP2-T26 Servicing HP BladeSystem Solutions our products come with a 100% guarantee of success. We hold this claim because of the highly dedicated and expert team that we have and because of our past performance.

QUESTION NO: 1
Technician is installing HP ProLiant servers at different customer sites. Since the technician wants to have the ProLiant equipped with the latest firmware level available, what is the best solution?

A. Before going onsite, the technician should download the latest SmartStart Firmware CD and use this SmartStart Firmware CD for deploying the latest firmware.
B. The technician should download the latest SmartStart firmware CD and add the firmware releases published after the release of the latest SmartStart Firmware CD to the
\compaq\swpackages on the CD-ROM.
C. The technician should create a bootable USB stick containing the latest SmartStart Firmware CD and add the firmware releases published after the release of the latest SmartStart Firmware CD to the \compaq\swpackages on the USB stick.
D. Before going onsite, the technician should download the latest SmartStart Firmware CD. The technician should download the firmware releases published after the release of the latest SmartStart Firmware CD and save these images on floppies. The SmartStartFirmware CD and downloaded images on floppy are used for deploying the latest firmware.

Answer: C

QUESTION NO: 2
Which interface can be used to check the firmware version of all components in a blade
enclosure?

A. HP System Update Manager
B. Virtual Connect Manager
C. Onboard Administrator
D. HP System Management Homepage

Answer: C

QUESTION NO: 3
Which ProLiant Server Blade utilities are available to check the system information and BIOS version? (Select two.)

A. ROM-Based Setup Utility
B. Diagnostic Utility
C. Inspect Utility
D. Option ROM Configuration for Arrays Utility
E. Network Boot Utility

Answer: A,C
Exam dumps, software Testing engine Testcenter HP2-T26 HP cert24

Exam dumps, software Testing engine Testcenter HP2-Z09 HP cert24
Exam dumps, software Testing engine Testcenter HP2-Z09 HP cert24

IT Exam,IT Certification,braindump,original questions, question pool,document, braindump, test questions, test question, dumps, test answers, cert24.com, preparation, pdf, certification questions, answers Certification, certification test, practice test, exam dumps, certification training, answers real questions

HP2-Z09 TippingPoint Advanced Technical Security Products our products come with a 100% guarantee of success. We hold this claim because of the highly dedicated and expert team that we have and because of our past performance.

QUESTION NO: 1
What happens when an IPS enters Performance Protection Mode (also known as Logging Mode)?
A. Traffic is permitted or blocked depending on segment configuration.
B. Blocks still occur, but other traffic is permitted without notifications.
C. Traffic continues to be inspected, but event notifications are suppressed.
D. Network congestion ceases.
Answer: D

QUESTION NO: 2
The TippingPoint Threat Suppression Engine defines a flow based on which criteria? (Select three.)
A. source/destination IP address
B. source/destination MAC address
C. IP protocol
D. source/destination TCP/UDP port
E. incoming segment port
Answer: A,C,D

QUESTION NO: 3
Which inbuilt feature can prevent the IPS from degrading network performance due to a poorly performing filter where that filter sees a lot of suspicion but fails to match, and congestion is occurring?
A. Link-down synchronization
B. Layer-2 Fallback
C. Performance Protection
D. Adaptive Filter Configuration (AFC)
Answer: D

Exam dumps, software Testing engine Testcenter HP2-Z09 HP cert24

Exam dumps, software Testing engine Testcenter HP2-Z18 HP cert24
Exam dumps, software Testing engine Testcenter HP2-Z18 HP cert24

IT Exam,IT Certification,braindump,original questions, question pool,document, braindump, test questions, test question, dumps, test answers, cert24.com, preparation, pdf, certification questions, answers Certification, certification test, practice test, exam dumps, certification training, answers real questions

HP2-Z18 Network Infrastructure AIS 2011 our products come with a 100% guarantee of success. We hold this claim because of the highly dedicated and expert team that we have and because of our past performance.

QUESTION NO: 1
Port B1 on an HP ProCurve 5406zl switch is an untagged member of VLAN 155 and not a tagged member of any VLAN. Port C1 is a tagged member of VLAN 155 and an untagged member of VLAN 100. You issue the following command:
5406zl(config)# no vlan 155
Why do you receive the following prompt?
The following ports will be moved to the default VLAN:
Bl
Do you want to continue? [y/n] :
A. The CLI always issues this prompt when deleting a VLAN.
B. The CLIwill not allow you to orphan a port.
C. The CLI will not delete a VLAN with any port membership.
D. All ports must be moved to the default VLAN before you can delete the VLAN.

Answer: D

QUESTION NO: 2
After issuing the following two CLI commands, how can you gain access to the CLI of the switch if the manager and operator passwords have been lost?
E5406 (config)# no front-panel-security password-clear
E5406(config)# no front-panel-security factory-reset
A. Power cycle the switch and access the ROM console to clear passwords at the manager prompt.
B. Press the Reset and Clear buttons on the switch’s front panel, release the Reset button and hold the Clear button until the all switch LEDs blink rapidly.
C. Contact support and obtain a one-time password to gain access to the switch.
D. Reset the passwords using the Secure Access Wizard i n ProCurve Manager Plus.

Answer: C

QUESTION NO: 3
You have configured a dynamic LACP four-port trunk connecting two HP E-Series switches How will the switches share the load over the trunk?
A. The switch that receives the first packet in each conversation will balance the load by ensuring reply packets use a different link.
B. Each switch will assign conversations to links independent of the other switch’s selection.
C. The switches will exchange LACP BPDUs to negotiate a load-sharing algorithm.
D. The switches wi II dynamically calculate the path of least congesti on for each conversation

Answer: C

Exam dumps, software Testing engine Testcenter HP2-Z18 HP cert24

Exam dumps, software Testing engine Testcenter HP2-Z21 HP cert24
Exam dumps, software Testing engine Testcenter HP2-Z21 HP cert24

IT Exam,IT Certification,braindump,original questions, question pool,document, braindump, test questions, test question, dumps, test answers, cert24.com, preparation, pdf, certification questions, answers Certification, certification test, practice test, exam dumps, certification training, answers real questions

HP2-Z21 Planning and Designing HP Enterprise Networking Solutions our products come with a 100% guarantee of success. We hold this claim because of the highly dedicated and expert team that we have and because of our past performance.

QUESTION NO: 1
The exhibit displays the type of information about an HP A5820-24XG-SFP+ switch that a sales professional might cite to a customer interested in the product’s performance.
Exhibit: Product specifications
HP A5820-24XG-SPF+ specifications
Maximum 10G: 24
Routing and switching capacity (Gbps): 488
Throughput (Mpps): 363
Typical latency (microseconds):
Layer 2 = Less than 3; normal Layer 3 = Less than 6; jumbo Layer 3 = 26
Which specification demonstrates that this switch provides a good QoS with minimal lag and jitter for all types of traffic?
A. total routing and switching capacity
B. throughput
C. typical latency
D. maximum 10G port density

Answer: C

Reference: http://www.wimax.com/wimax-tutorial/quality-of-service (first paragraph)

QUESTION NO: 2
Which feature is supported on the HP A8800 Router Series, but not on the HP A6600 Router Series?
A. Layer 3/4 traffic prioritization
B. Hierarchical QoS (H-QoS)
C. Intelligent Resilient Framework (IRF)
D. Virtual Routing and Forwarding (VRF)

Answer: B

Reference: http://h18000.www1.hp.com/products/quickspecs/13810_na/13810_na.PDF

QUESTION NO: 3
Which versatile switch series is designed to function at the aggregation layer of a three-tier enterprise campus LAN, the core of a small data center, and the access layer of an advanced enterprise campus LAN?
A. A12500
B. A9500
C. A7500
D. A5820

Answer: D

Exam dumps, software Testing engine Testcenter HP2-Z21 HP cert24

Exam dumps, software Testing engine Testcenter HP2-Z22 HP cert24
Exam dumps, software Testing engine Testcenter HP2-Z22 HP cert24

IT Exam,IT Certification,braindump,original questions, question pool,document, braindump, test questions, test question, dumps, test answers, cert24.com, preparation, pdf, certification questions, answers Certification, certification test, practice test, exam dumps, certification training, answers real questions

HP2-Z22 Selling HP Network Solutions our products come with a 100% guarantee of success. We hold this claim because of the highly dedicated and expert team that we have and because of our past performance.

QUESTION NO: 1
A company is concerned that the temporary workers at a branch office will introduce viruses and other malware into the internal network. The company also wants to provide network access for branch employees who telecommute. Which features make the HP Threat Management Services zl Module a possible security solution for this company’s branch office? (Select two.)

A. Endpoint Admission Defense (EAD)
B. Web filtering
C. Virtual Private Network (VPN)
D. Intrusion Protection System (IPS)
E. User Access Management (UAM)

Answer: C,D
Explanation: The HP Threat Management Services (TMS) zl Module is a multifunction security system for the HP E5400 zl and E8200 zl Switch Series. It is comprised of a stateful firewall, an intrusion detection/prevention system (IDS/IPS), and a virtual private network (VPN) concentrator. It enables network administrators to compartmentalize department traffic, protect the network from malware, and provide secure remote access and site-to-site connectivity.
Reference: HP Threat Management Services zl Module, QuickSpecs
http://h18000.www1.hp.com/products/quickspecs/13376_div/13376_div.PDF Page 1, ProductOverview)

QUESTION NO: 2
Which is a benefit that distinguishes HP PCM+ from HP PCM?

A. Customers can monitor basic device health.
B. Customers can capture and browse Simple Network Management Protocol (SNMP) and syslog events.
C. Customers can map network devices.
D. Customers can manage their many remote sites.

Answer: D

QUESTION NO: 3
Your customer’s network provides mission-critical services. The company has customers
worldwide, so these services are being used all the time. The company cannot afford any
downtime. Because the company’s IT staff is relatively new and inexperienced, the customer wants both hardware replacement services and an HP support person onsite if a problem occurs.
Which care pack would you recommend?

A. HP Support Plus
B. HP 24×7 Software Support with 4-hour Hardware Exchange
C. HP Support Plus 24
D. HP 4-hour Same Business Day

Answer: C

Exam dumps, software Testing engine Testcenter HP2-Z22 HP cert24

Exam dumps, software Testing engine Testcenter HP2-Z23 HP cert24
Exam dumps, software Testing engine Testcenter HP2-Z23 HP cert24

IT Exam,IT Certification,braindump,original questions, question pool,document, braindump, test questions, test question, dumps, test answers, cert24.com, preparation, pdf, certification questions, answers Certification, certification test, practice test, exam dumps, certification training, answers real questions

HP2-Z23 Selling HP Enterprise Networking Solutions our products come with a 100% guarantee of success. We hold this claim because of the highly dedicated and expert team that we have and because of our past performance.

QUESTION NO: 1
What is an important benefit of the IMC platform?

A. consolidates multiple disparate network management applications into a single common platform
B. provides a mainframe-based architecture that centralizes services
C. replaces desktop software licensed applications
D. optimizes use of the legacy PBX platform

Answer: A

QUESTION NO: 2
What Is one of the new rules of networking?

A. borderless networks
B. up to three times better performance
C. simplified network designs
D. up to four time better performance

Answer: A

QUESTION NO: 3
A customer is considering installing a nest generation IT architecture that combines virtualized servers, storage, networks, and facilities into a single environment optimized for any workload.
What is the name of HP’s framework for this type of architecture?

A. HP Merged Infrastructure
B. HP Converted Infrastructure
C. HP Connected Infrastructure
D. HP Converged Infrastructure

Answer: D

Exam dumps, software Testing engine Testcenter HP2-Z23 HP cert24

Exam dumps, software Testing engine Testcenter I10-001 XML Master cert24
Exam dumps, software Testing engine Testcenter I10-001 XML Master cert24

IT Exam,IT Certification,braindump,original questions, question pool,document, braindump, test questions, test question, dumps, test answers, cert24.com, preparation, pdf, certification questions, answers Certification, certification test, practice test, exam dumps, certification training, answers real questions

I10-001 XML Master Basic V2 our products come with a 100% guarantee of success. We hold this claim because of the highly dedicated and expert team that we have and because of our past performance.

QUESTION: 1
Select which statement correctly describes the results of reading the attribute values below using a non-validating XML processor, which does not check validity. Note that [#x9] is shown using #x9,
[#xA] is shown using #xA, [#xD] is shown using #xD, and [#x20] is shown using #x20.
Attribute=”[#xA]
[#x9] data 1[#xD][#xA]
data 2″

A. Attribute=”[#x20][#x20]data 1[#x20]data 2″
B. Attribute=”data 1[#x20]data 2″
C. Attribute=”[#xA]data 1[#xA]data 2″
D. Attribute=”[#xA][#x9]data 1[#xD][#xA]data 2″

Answer: A

QUESTION: 2
Select which statement correctly describes the results of reading the attribute values below using a non-validating XML processor, which does not check validity. Note that [#x9] is shown using #x9,
[#xA] is shown using #xA, [#xD] is shown using #xD, and [#x20] is shown using #x20.
Attribute=”&ENT;”
A. Attribute=”[#x20][#x20]data 1[#x20]data 2″
B. Attribute=”data 1[#x20]data 2″
C. Attribute=”&ENT;”
D. Attribute=”[#xA][#x9]data 1[#xD][#xA]data 2″

Answer: A

QUESTION: 3
Select which statement correctly describes the XML document below.

]>
]]>

A. This is not a valid XML document, because there is no element type declaration for
element2 and element3.
B. This is not a well-formed document, because the CDATA section is not closed.
C. This is not a well-formed document, because the CDATA section does not contain
<![CDATA[.
D. This is a valid XML document.

Answer: D

Exam dumps, software Testing engine Testcenter I10-001 XML Master cert24